|CHEAP A$$ THROTTLE CLUTCH
by. Vince Sbordone
Build a throttle clutch.
Here's what you need ...
About a foot of vacuum hose and 3 or 4 wire ties. That's it. Take your bike to your auto parts store and find a piece of vacuum hose that will sit snugly between the hand grip to starter switch housing. Refer to photos 1 through 4.
You might be wondering why it's referred to as
a Throttle Clutch rather than a throttle lock.
To engage simply reach over, grab the hose and lightly pull straight down. Now adjust the throttle to the desired HIGHWAY SPEED.
DON'T USE THIS IN CITY TRAFFIC, YOU'LL KILL YOURSELF. SEE DISCLAIMER BELOW.
To disengage, grab the tail and pull back and
Disclaimer: I AM NOT RESPONSIBLE FOR DAMAGE TO
YOUR BIKE IN ANY WAY, SHAPE, OR FORM. I AM NOT RESPONSIBLE FOR INJURY OR
DEATH TO YOU, YOUR LOVED ONES, THOSE YOU HATE, OR ANYONE ELSE THAT YOU KNOW
OR DON'T KNOW FOR THAT MATTER.